Icon Matte Black Faster Fusion Plastisol Ink

Icon Matte Black Fast Fusion Plastisol Ink | Low-Cure, Build-Up Resistant

Icon Matte Black Fast Fusion Plastisol Ink is a premium plastisol ink designed for screen printing on all garment types, including cotton, 50/50 blends, and polyester. Formulated for a matte finish, it resists build-up during wet-on-wet printing and features a silky-smooth, low-viscosity texture for faster, more productive prints. On automatic presses, it allows lower pressure settings to extend screen longevity.

Key Features:

• Ready to Use: Usable directly from the container, though stirring is recommended before printing.
• Wet-on-Wet Printing: Resistant to build-up.
• Versatile Fabric Compatibility: Suitable for 100% cotton, 50/50 polyester blends, and most other blends.
• Fast Flashing and Low Curing: Supports quick production (2–5 seconds flash time) and cures between 295–310°F.

Curing Instructions: Flash at approximately 220°F for 3–5 seconds and cure at 295–310°F.

Cleanup and On-Press Color Changes: Use a press wash for on-press color changes and an ink degradant for removal. The stencil can be saved or the entire screen printing frame reclaimed.

Storage Instructions: Store at room temperature, away from direct sunlight and extreme heat (below 95°F). Best used within one year of the manufacturing date.

Additional Features and Tips:

• Finish: Matte
• Stencils: Compatible with all direct emulsion or capillary film types
• Opacity: Highly opaque
• Wash-Up: Use Thinner DT or conventional plastisol wash-up systems
• Bleed Resistance: Excellent, ideal for polyester
• Ink Build-Up on Screen: Minimal
• Mileage: Approximately 800–1,750 sq. ft. per gallon
• Drying: 295–310°F
• Fabrics: Suitable for all fabric types; use 196–305 monofilament for soft-hand coverage

Note: Always pretest to confirm suitability and establish procedures before production. Stir plastisols before each use. Avoid dry cleaning, bleach, or direct ironing.