Ulano No. 3 Screen Degreaser Liquid

Ulano No. 3 Screen Degreaser Liquid | All Mesh

Lawson no longer supplies Ulano No. 3 Screen Degreaser, instead the MD-100 Mesh Degreaser is recommended as a replacement.

Click Here to Go to MD-100 Mesh Degreaser

Ulano No. 3 Liquid Screen Degreaser Description

A degreaser solution for all mesh, new or used, before stencil making.
Ready-to-use. No mixing. Non-caustic.

A degreaser solution that removes dirt, dust and oils from all fabrics, new and used.

Degreasing should be considered a first step in stencil-making, as it greatly reduces the risk of stencil-making failure, extends on-press stencil longevity, and alleviates pinholing. Screen Degreaser Liquid No. 3 is ready-to-use--no mixing. Degreases effectively in hard water. Rinses clean with hot or cold water. Non-caustic--will not harm frames, fabric, or adhesives on stretch and glue frames. Recommended for use with all Ulano stencil systems.

Instructions

• If using Screen Degreaser Concentrate No. 33, mix ten parts water to one part Ulano No. 33. Apply Screen Degreaser Liquid No. 3 or Screen Degreaser Concentrate No. 33 to a wet screen from both sides with a wet, soft, long-bristle nylon brush. Continue brushing until a light foam develops. Let the screen stand a few minutes until the foam subsides.
• Rinse the screen thoroughly from both sides. Including the inside edge of the frame and the frame corners, with hot or cold water.

Additional Information
Click here for Technical Data Sheet