Khaki DI - 31330 LB

Khaki DI-31330 LB | Low-Bleed and Low-Cure

Dynamic Ink Khaki DI-31330 LB is one of the premier plastisol screen printing inks. It offers the best opacity and bleed resistance on polyester, 50/50 blends, and other fabrics. This low-cure ink, curing at 270–280°F, helps eliminate dye migration on even the most challenging "bleeders".

All Dynamic Ink flashes quickly, allowing you to speed up production when printing a white underbase. You can print-flash-print or print wet-on-wet, depending on your screen printing job.

All inks in the Dynamic Series are non-phthalate and lead-free. The Dynamic Series offers vibrant colors and a creamy plastisol ink straight from the bucket. The high opacity helps screen printers achieve better prints with a great feel.

Curing Instructions: Flash at approximately 220°F for 3–5 seconds and cure at 270–280°F.

Clean Up and On-Press Color Changes: Use a press wash for on-press color changes and an ink degrader when removing the ink. The stencil can then be saved, or you can reclaim the entire screen printing frame.

Storage Information: Store at room temperature and avoid direct sunlight. Best used within one year of the manufacturing date.

Features & Tips for Optimal Results

Pantone: 468C

Finish: Semi-Gloss

Stencils: All types of direct emulsion or capillary film can be used

Opacity: Opaque

Wash-Up: Use Thinner DT or any conventional plastisol wash-up system

Bleed Resistance: Excellent - Great for all polyester

Storage: Store in a relatively cool area. Keep away from extreme heat and direct sunlight. Store below 95°F

Ink Build-Up on Screen: Minimal

Mileage: Excellent. Approximately 800–1,750 sq. ft. per gallon

Drying: 270–280°F

Fabrics: All types. For soft-hand coverage, use 196 to 305 monofilament

Always pretest before use to establish suitability and procedures prior to production.

Stir plastisols before each use. Do not dry clean, use bleach, or iron directly.